BVX-201 extraction unit is a quiet and strong extraction unit for 2 workplaces.

The unit is equipped with HEPA gas filter that neutralize e.g. solder and galvanic fumes up to 99.97%. The BVX-201 unit can also be used to remove grinding dust by using a special particle filter (OK51201). Health-hazardous particles that arise when grinding with e.g. silicon polishers or when using polishing waxes will be eliminated with this filter. The filters can easily be replaced in just a few seconds.

The included BVX flexible arms can be mounted permanently or temporarily by using the table brackets and clamps at the bench so that the extraction arms can always be positioned where they are needed. The round oval nozzles that are mounted on the BVX flexible arms (OK50620) are for removing grinding dust, but you can combine these arms even with a rectangular (OK50600) or round (OK50610) nozzles to extract solder fumes or other fumes that occur at your workplace.

It is also possible to connect the Omniflex system to the unit. The more advanced Ominflexarms offer a very stable and heat-resistant system. Choose between two different sized rectangular nozzles (OK51122 and OK51126) or a flat oval nozzle (OK51124), which suits your individual needs best.

BVX-201 units are extremely quiet and can therefore be placed close to the workplace. The devices can be adapted to any workplace and contributes to an optimal and healthy working environment.

Contact us – we tailor the equipment to your workplace.

Under workbench extraction system comes with: 

• Flexible arms (2 x 760 mm) 
• Bench mounting brackets with C-clamps 
• Connection hoses (2 x 1800 mm) 
• HEPA-filter 
• Pre-filter 
• Easy access on/off remote switch 

Specifications: 

• Fan capacity: 250 m3/h 
• Noise level: < 55 dBA 
• Dimensions: 508 x 254 x 388 mm 
• Weight: 9 kg 
• Voltage: 100 - 240 VAC
• Power: 85 W